Granola and Energy Bars

To all granola and energy bar manufacturers, here are some equipment that will make your life much easier! Change your product sizes via the operator interface without any mechanical intervention. Do you have products that are difficult to cut with the traditional method? Discover all the possibilities the guillotine and ultrasonic slitter combination has to offer. Contact our experts to set up the right combination of equipment for your production.

 

N.B. All equipment is made of stainless steel and high-quality components to meet the highest sanitary standards in the industry. If you cannot find the equipment you are looking for in our line of products, we will design and manufacture one to fit your specific needs.

Our solutions

Autonomous

Continuous

Need advice on choosing the best solution for your needs?


Contact our ultrasonic cutting experts

MSR-210 SU

View Details
  • Application :

    Sheet

  • Speed :

    Up to 180/h

  • Product Size Accepted :

    Maximum slab: 24″ x 16″ (610 mm x 405 mm)
    Maximum height: 3 1/4″ (82 mm)

  • Portion Range :

    Programmable

  • Dimensions :

    Length: 80" (2032 mm)
    Width: 42" (1067 mm)
    Height: 80" (2032 mm)

  • Power :

    208 volts
    3 phases
    100 amps

  • Compressed Air :

    100 PSI

Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
The cutting table is equipped with two servomotors that ensure the highest precision for your portion sizes.
This machine is equipped with two half-wave ultrasonic blades for a total of 28″ of slicing. It is ideal for 26 × 18 baking sheets or round cakes up to 3.5″ high.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
The cutting table is equipped with two servomotors that ensure the highest precision for your portion sizes.
This machine is equipped with two half-wave ultrasonic blades for a total of 28″ of slicing. It is ideal for 26 × 18 baking sheets or round cakes up to 3.5″ high.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

MSR-210 PU

View Details
  • Application :

    Sheet

  • Speed :

    Up to 180/h

  • Product Size Accepted :

    Maximum slab: 24″ x 16″ (610 mm x 405 mm)
    Maximum height: 3 1/4″ (82 mm)

  • Portion Range :

    Programmable

  • Dimensions :

    Lenght: 62'' (1575 mm)
    Width: 47'' (1194 mm)
    Height: 81'' (2057 mm)

  • Power :

    240 volts
    1 phase
    60 amps

  • Compressed Air :

    100 PSI

Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
The cutting table is equipped with two servomotors that ensure the highest precision for your portion sizes.
This machine is equipped with two half-wave ultrasonic blades for a total of 28″ of slicing. It is ideal for 26 × 18 baking sheets or round cakes up to 3.5″ high.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

G4I-S4I

View Details
  • Application :

    Bande en continu

  • Speed :

    Up to 20 000/h

  • Product Size Accepted :

    Guillotine in width: 46'' (1168 mm)
    Slitter in width: 46 '' (1168 mm)
    Maximum height: 1'' (25 mm)

  • Portion Range :

    Programmable

  • Dimensions :

    Lenght: 230" (5842 mm)
    Width: 93" (2362 mm)
    Height: 78" (1981 mm)

  • Power :

    230 volts
    3 phases
    200 amps

  • Compressed Air :

    100 PSI

This is a robust and fast equipment that allows a 33″ wide band to be cut continuously, directly on the conveyor, while allowing a controlled spacing of the cut products.
This machine is equipped with two powerful ultrasonic guillotines. The guillotine is equipped with two servomotor axes and the slitter with three servomotor axes.
The two-axis guillotine is equipped with four 12″ blades and the three-axis slitter is equipped with four 12″ blades to cut multiple product sizes.
The products are moved by two polyurethane belt conveyors driven by a servomotor.
Position sensors and internal guiding devices provide excellent product control.
Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

G3I-S6I

View Details
  • Application :

    Continuous Band

  • Paper Insert Option :

    Non

  • Speed :

    Up to 60 000/h

  • Product Size Accepted :

    Guillotine in width: 34'' (864 mm)
    Slitter in width: 72'' (1830 mm)
    Maximum height: 1'' (25 mm)

  • Portion Range :

    Programmable

  • Dimensions :

    Length: 252" (6400 mm)
    Width: 97" (2464 mm)
    Height: 87" (2210 mm)

  • Power :

    230 volts
    3 phases
    200 amps

  • Compressed Air :

    100 PSI

This is a robust and fast equipment that allows a 33″ wide band to be cut continuously, directly on the conveyor, while allowing a controlled spacing of the cut products.
This machine is equipped with two powerful ultrasonic guillotines. The guillotine is equipped with two servomotor axes and the slitter with three servomotor axes.
The two-axis guillotine is equipped with four 12″ blades and the three-axis slitter is equipped with four 12″ blades to cut multiple product sizes.
The products are moved by two polyurethane belt conveyors driven by a servomotor.
Position sensors and internal guiding devices provide excellent product control.
Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Return to the previous page