Round Cakes

These machines offer all the options to allow you to cut a wide variety of round products: paper insertion, variable speeds, ultrasonic, stand-alone and continuous station process, possibility of cutting round and sheet products with the same equipment, and more. All our equipment is automated and provides reliability and speed for hours without interruption. Our experts will guide and advise you to ensure that the equipment you choose meets your goals.

 

N.B. All equipment is made of stainless steel and high-quality components to meet the highest sanitary standards in the industry. If you cannot find the equipment you are looking for in our line of products, we will design and manufacture one to fit your specific needs.

Our solutions

Need advice on choosing the best solution for your needs?


Contact our ultrasonic cutting experts

MR-110 SU / Paper

View Details
  • Application :

    Round

  • Paper Insert Option :

    Paper Rolls

  • Speed :

    Up to 300/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12'' (305 mm)
    Maximum height : 6” (150 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 66" (1676 mm)
    Width: 34" (864 mm)
    Height: 80" (2032 mm)

  • Power :

    240 volts
    1 phase
    100 amps

  • Compressed Air :

    100 PSI

This is ideal for the manufacturer who seeks production reliability and constancy.
This equipment cuts one cake at a time, and its versatility makes it possible to slice using ultrasound, with or without paper inserts.
The paper system is supplied by two rolls located at the back of the guillotine. The machine is equipped with both a cutting and an automatic paper insertion system.
The cutting table is equipped with one servomotor that ensures the highest precision of your portion sizes.
This machine is equipped with a full-wave ultrasonic blade for a maximum slicing height of 6.5″.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

MSR-220

View Details
  • Application :

    Round

  • Speed :

    Up to 425/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)
    Maximum height : 4” (102 mm)


  • Portion Range :

    2 - 24

  • Dimensions :

    Lenght: 27" (686 mm)
    Width: 45" (1143 mm)
    Height: 57" (1448 mm)

  • Power :

    240 volts
    1 phase
    40 amps

  • Compressed Air :

    100 PSI

This is ideal for slicing your cheesecakes or frozen cakes into perfect pieces.
In addition to being very quiet, this machine is highly reliable, which will please your operators.
With its 2 hp electric motor, the powerful guillotine easily slices two frozen cakes at a time.
The cutting table is equipped with two servomotors that ensure the highest precision of your portion sizes.
This machine is equipped with stainless steel blades for a maximum slicing height of 4″.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

MSR-210 SU

View Details
  • Application :

    Round

  • Speed :

    Up to 480/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)
    Maximum height: 3 1/4" (82 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 80" (2032 mm)
    Width: 42" (1067 mm)
    Height: 80" (2032 mm)

  • Power :

    208 volts
    3 phases
    100 amps

  • Compressed Air :

    100 PSI

Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
The cutting table is equipped with two servomotors that ensure the highest precision for your portion sizes.
This machine is equipped with two half-wave ultrasonic blades for a total of 28″ of slicing. It is ideal for 26 × 18 baking sheets or round cakes up to 3.5″ high.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
The cutting table is equipped with two servomotors that ensure the highest precision for your portion sizes.
This machine is equipped with two half-wave ultrasonic blades for a total of 28″ of slicing. It is ideal for 26 × 18 baking sheets or round cakes up to 3.5″ high.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

MR-222 SU/Paper

View Details
  • Application :

    Round

  • Paper Insert Option :

    Paper Rolls

  • Speed :

    Up to 750/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)
    Maximum height : 6” (150 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 78" (1981 mm)
    Width: 49" (1245 mm)
    Height: 85" (2159 mm)

  • Power :

    208 volts
    3 phases
    100 amps

  • Compressed Air :

    100 PSI

This is specifically designed for the manufacturer who seeks reliability and a high production volume.
This equipment cuts two cakes at a time, and its versatility allows ultrasonic slicing, with or without paper insertion.
The loading/unloading of the products is carried out during concurrent operation times.
The paper system is supplied by four rolls located at the back of the guillotine. The machine is equipped with both a cutting and an automatic paper insertion system.
The cutting table is equipped with four servomotors that ensure the highest precision of your portion size.
This machine is equipped with a full-wave ultrasonic blade for a maximum slicing height of 6.5″.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Robot (cut on the belt)

View Details
  • Application :

    Round

  • Speed :

    Up to 500/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 146" (3708 mm)
    Width: 57" (1448 mm)
    Height: 84" (2134 mm)

  • Power :

    240 volts
    1 phase
    65 amps

  • Compressed Air :

    100 PSI

An ultrasonic blade at the end of a robot arm—this is the most flexible solution for your production operations.
This machine is equipped with an IP-69K robot, which can easily withstand the daily cleaning of your equipment.
The ultrasonic blade has a cleaning container and an automated cleaning cycle, which ensures a high-quality product finish.
The products are moved on a polyurethane belt conveyor featuring two fine-nosed ends for the easy transfer of small products.
Position sensors and internal guiding devices provide excellent product control.
The detection system allows the products to be cut continuously or in a stopped position.
In the stopped position, the system accepts different products (round cakes, sheet cakes, loaf cakes) on custom-made cutting plates.
Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The flexibility and speed of movement of the robot produce a perfectly sliced product.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

MR-222 SU/Automatic Feeder

View Details
  • Application :

    Round

  • Paper Insert Option :

    Paper rolls

  • Speed :

    Up to 720/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)
    Maximum height: 3 1/4" (82 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 144" (3658 mm)
    Width: 36" (914 mm)
    Height: 84" (2134 mm)

  • Power :

    208 volts
    3 phases
    75 amps

  • Compressed Air :

    100 PSI

Fully automated, this is ideal for the manufacturer who seeks continuous operator-free production.
This equipment transfers four cakes at a time. Two cakes are transferred to the exit conveyor, while the two other cakes are pushed onto the cutting table.
The loading/unloading of the products is carried out during concurrent operation times.
The infeed conveyor both serves as an accumulator and perfectly positions the two products for transfer.
The feed conveyor allows the transfer of the cut cakes to the packaging station.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

2GHU-2GU

View Details
  • Application :

    Round

  • Speed :

    Up to 1 000/h

  • Product Size Accepted :

    Minimum product diameter: 6'' (150 mm)
    Maximum product diameter: 12” (305 mm)

  • Portion Range :

    2 - 24

  • Dimensions :

    Length: 272" (6909 mm)
    Width: 89" (2260 mm)
    Height: 94" (2388 mm)

  • Power :

    230 volts
    3 phases
    200 amps

  • Compressed Air :

    100 PSI

Here is a multifunctional, robust, and fast piece of equipment. If you need to change products frequently and carry out your operations quickly, this is an excellent choice.
This machine is equipped with two powerful ultrasonic guillotines with 360° rotating heads.
Each guillotine has three servomotors with either two 14″ blades or one 12″ blade to cut multiple product sizes.
The products are moved by two polyurethane belt conveyors driven by a servomotor.
Position sensors and internal guiding devices provide excellent product control.
Up to 100 different SKUs can be programmed on this equipment. It is ideal for the manufacturer who has several product changes per day and who seeks constant quality at a higher speed.
The power of the guillotine ensures that even the most challenging products can be cut repeatedly, and its servomotors allow for gentle movements to produce a perfectly sliced product.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Dual Robot

View Details
  • Application :

    Round

  • Speed :

    Up to 3 600/h

  • Product Size Accepted :

    Minimum product diameter: 6” (150 mm)
    Maximum product diameter: 12” (305 mm)

  • Portion Range :

    2-4-6-8-12

  • Dimensions :

    Length: 104" (2641 mm)
    Width: 55" (1397 mm)
    Height: 84" (2134 mm)

  • Power :

    240 volts
    1 phase
    65 amps

  • Compressed Air :

    100 PSI

Not one but two robots working in sync, paired with a conveyor that never stops—that’s your increased productivity.
This machine is equipped with two IP-69K robots, which can easily withstand the daily cleaning of your equipment.
Each robot and its ultrasonic blade have their own cleaning containers and automated cleaning cycles, which ensures a high-quality product finish.
The products are moved continuously using a conveyor equipped with customized guiding devices for each product.
Position sensors and line tracking allow the robots to synchronize perfectly in the center of the products.
This machine is made of stainless steel, and its design allows easy cleaning with a low-pressure water jet.

Return to the previous page